State of the art LED solid state lighting in blue, red & green
and they weigh less than 1 ounce (1.5 oz. with the protective
covering)
Great redundancy! The special series parallel circuitry means
that even if you loose an LED (not very likely), only 3 LEDs in
the 48 LED array will fail. You won't even notice.
Illuminates entire instrument panel with bright and clean
light. No halos, hot spots or weak spots – just beautiful even
light. The EasyBrow accentuates the needles and indices on the
gauges and makes reading the instruments a joy!
Very long life cycle. The LEDs on the EasyBrow Light have a life
span of at least approximately 80,000 hours!
Many times brighter than the original Grumman panel lighting
and about half the power consumption
Unlike the original eye brow panel lights, the EasyBrow lights
run extremely cool with no heat build-up.
All components have a UL flame retardant rating of at least HB
94
They are fully controllable using the existing panel rheostat
-- from dim to full bright.
Simple installation. Just remove the existing eye brow
incandescent bulbs, mount the light strip on the lower eye brow
panel with the attached 3M tape and plug in the adaptors into the
bulb sockets .
These lights bath your panel in beautiful light and will not
diminish night vision.
Vibration proof design. Aircraft vibration will not be a
factor.